34
PNP/PCI Configuration
This section describes configuring the PCI bus system. It covers some
very technical items and it is strongly recommended that only experi-
enced users should make any changes to the default settings.
ROM PCI/ISA BIOS
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
Resources Control By
Reset Configuration Data
:Auto
:Disabled
ESC
F1
F5
F6
F7
:Quit
:Help
:Old Values
:Load BIOS Defaults
:Load Setup Defaults
↑↓→ ←
PU/PD/+/-
(Shift) F2
:Select Item
:Modify
:Color
PCI IRQ Active By
:
Level
PCI IDE IRQ Map To
:
PCI-AUTO
Primary
IDE INT#
:
A
Secondary IDE INT#
:
B
Reset Configuration Data
Enabled
Disabled
The BIOS will reset the configuration data once automatically.
The BIOS will not reset the configuration data.
Resources Controlled By
The system will automatically detect the settings for you. The
categories that follow will not be shown on the PNP/PCI Con-
figuration screen.
This allows you to set the IRQ/DMA (you have assigned your
add-in card) to Legacy ISA or PCI/ISA PnP. For non-PnP ISA
cards, select Legacy ISA. For PnP ISA or PCI cards, select
PCI/ISA PnP.
Auto
Manual
PCI IRQ Active By
This category is used to set the method by which the PCI bus recog-
nizes that an IRQ service is being requested by a device. Under all
circumstances, you should retain the default configuration unless a dif-
ferent setting is needed.
