www.dfi.com
Chapter 3 BIOS Setup
Chapter 7
38
Chapter 7 BIOS Setup
Boot
This section configures boot options.
OS Selection
Select the system’s operating system: Windows, Linux or DOS
.
Numlock
Select the power-on state for the numlock key
.
Boot Type
Select the boot type. The options are Dual Boot Type, Legacy Boot Type or UEFI
Boot Type.
PXE Boot Capability or PXE Boot to LAN
Disables or enables Preboot eXecution Environment (PXE) boot to LAN (if Boot
Type selected is legacy) or PXE Boot Capability (if Boot Type selected is UEFI).
Network Stack
Enable or disable network stack in UEFI mode. This option will be shown only if
the PXE Boot Capability is enabled.
USB Boot
Enable or disable the booting to USB boot devices.
Selects Power-on state for
Numlock
OS Selection
Numlock
Boot Type
PXE Boot to LAN
USB Boot
Main
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Security
Exit
Rev. 5.0
<Windows>
<On>
<Legacy Boot Type>
<Disabled>
<Enabled>
Boot
Exit
This section configures the parameters for exiting the BIOS menu.
Exit Saving Changes
Select this field and then press <Enter> to exit the system setup and save your changes.
Load Optimal Defaults
Select this field and then press <Enter> to load optimal defaults.
Discard Changes
Select this field and then press <Enter>to exit the setup utility without saving your changes.
Exit system setup and save
your changes.
Exit Saving Changes
Load Optimal Defaults
Discard Changes
Main
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Security
Boot
Rev. 5.0
Exit
