DFI AM75-EC User Manual Download Page 46

Page: 46 / 99

Hardware Installation

2.8.17 AGP 4x LED and DIMM/PCI Standby Power LED

AGP 4x LED

This LED will light only when the AGP slot is installed with a 4x add-

in card.

DIMM Standby Power LED

This LED will turn red when the systems power is on or when it is

in the Suspend state (Power On Suspend or Suspend to RAM). It

will not light when the system is in the Soft-Off state.

PCI Standby Power LED

This LED will turn red when the system is in the power-on, Soft-Off

or Suspend (Power On Suspend or Suspend to RAM) state.

3.3VSB Standby for PCI (Jumper JP1)

The default setting of jumper JP1 is On. It provides 3.3VSB

Standby power to the PCI slots. If you are using a PCI modem

card that does not comply to the PCI 2.2 specification, please

set this jumper to Off. The PCI Standby Power LEDs light will

subsequently turn off.

Summary of Contents for AM75-EC




































































































Search results

Summary of Contents for AM75-EC

Reviews:

Related manuals for AM75-EC

Brands by name

Popular brands

DFI AM75-EC, User Manual

Search results

Summary of Contents for AM75-EC

Reviews:

Related manuals for AM75-EC

Brands by name

Popular brands