68
!
Award BIOS Setup Utility
Resume On LAN/Ring
This field supports two functions.
•
When enabled, the system will power-on to respond to calls
coming through an external or internal modem. Refer to Wake-
On-Ring Connector in chapter 2 for more information.
•
When enabled, the LAN card in the system will allow the
network to power-on a Soft Power Down (Soft-Off) PC.
However, if your system is in the Suspend mode, you can wake
up the system only through an IRQ or DMA interrupt. Your
LAN card must support the remote wake up function. Refer
to Wake-On-LAN Connector in chapter 2 for more
information.
Resume By Alarm
Enabled
When Enabled, you can set the date and time you
would like the Soft Power Down (Soft-Off) PC to
power-on in the Date (of Month) and Resume
Time (hh:mm:ss) fields. However, if the system is
being accessed by incoming calls or the network
prior to the date and time set in these fields, the
system will give priority to the incoming calls or
network.
Disabled
Disables the automatic power-on function. (default)
Date (of Month)
0
The system will power-on everyday according to the
time set in the Resume Time (hh:mm:ss) field.
1-31
Select a date you would like the system to power-on.
The system will power-on on the set date, and time
set in the Resume Time (hh:mm:ss) field.
Resume Time (hh:mm:ss)
This is used to set the time you would like the system to power-
on. If you want the system to power-on everyday as set in the
Date (of Month) field, the time set in this field must be later
than the time of the RTC set in the Standard CMOS Features
submenu.
Primary INTR
When set to On, the system will respond and wake up to an
IRQ activity that has been detected.
