DFI AGP-7400, User Manual

Page: 12 / 22

2
12
AGP-7400 Graphics Card User’s Manual
Tips in Handling the Graphics Card
1. To prevent electrostatic build-up, leave the graphics card in its
anti-static bag until you are ready to install it.
2. Do all preparation work on a static-free surface with graphics
card components facing up.
3. Hold the graphics card by its edges only. Be careful not to touch
any of the components, contacts or connections, especially gold
contacts, on the board.
Step 1: Switch Off Your Computer’s Power
Make sure that your computer is switched off and unplugged before
removing the cover. Also turn off any devices (printer, display, mo-
dem, etc.) you may have attached to your computer.
Warning:
Hazardous voltages are present and exposed when operating
the computer with the cover removed. To prevent equipment
damage and personal injury, never apply power to the com-
puter when the cover is off.
Step 2: Remove Your Computer’s Cover
Refer to your computer system manual for specific instructions on
removing your computer’s system unit cover. In general, you will need
to remove several screws on the back or side of the system unit and
then slide the cover off.
Step 3: Remove the Slot Cover
Remove the screw and slot cover (that corresponds to the AGP slot)
located at the back of the system unit. Save the slot cover for future
use. You will be using the screw in step 5.
Step 4: Unpack the Graphics Card
Remove the graphics card from the shipping box and its protective
packing. Please do not throw away the packing material or the shipping
box. You may use these again to prevent damage should you need to
ship the graphics card for repairs.