41
Chapter 3
BIOS SETTINGS
User's Manual |
ADS630-R680E/Q670E
41
Chapter 3
BIOS SETTINGS
41
Chapter 3
BIOS SETTINGS
Recorder Mode
With this mode enabled only text will be sent. This is to capture Terminal data.
Resolution 100x31
Enables or disables extended terminal resolution.
Putty Keypad
Select FunctionKey and KeyPad on Putty.
•
VT100
•
LINUX
•
XTERMR6
•
SCO
•
ESCN
•
VT400
Aptio Setup - AMI
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Version 2.22.1284. Copyright (C) 2022 AMI
Advanced
ACPI Configuration
Wake system from S5
When Enabled, the system will automatically power up at a designated time every day
. Once
it’s switched to [Enabled], please set up the time of day — hour, minute, and second — for
the system to wake up.
State After G3
Select between S0 State, and S5 State. This field is used to specify what state the system is
set to return to when power is re-applied after a power failure (G3 state).
S0 State
The system automatically powers on after power failure.
S5 State
The system enter soft-off state after power failure. Power-on signal input is required to
power up the system.
Last State
The system returns to the last state right before power failure.
Enable or disable System
wake on alarm event. When
enabled, System will wake
on the hr::min::sec speci
-
fied
RC ACPI Configuration
Wake system from S5
Wake up hour
Wake up minute
Wake up second
State After G3
[Enabled]
0
0
0
[S0 State]
X
Advanced
