28
2
Hardware Installation
Driver Installation
You may need to install the proper drivers in your operating
system to use the USB device. Refer to your operating system’s
manual or documentation for more information.
If you are using a USB 2.0 device, install the “Intel USB 2.0 Driv-
ers”. Refer to chapter 4 for more information.
Wake-On-USB Keyboard/Mouse
The system board supports the Wake-On-USB Keyboard/Mouse
function. This function allows you to use a USB keyboard or USB
mouse to wake up a system from the S3 (STR - Suspend To
RAM) state. To use this function:
•
BIOS Setting:
“USB KB Wake-Up From S3” in the Power Management Setup
submenu of the BIOS must be set to Enabled. Refer to chap-
ter 3 for more information.
Important:
•
If you are using the Wake-On-USB Keyboard/Mouse func-
tion for 2 USB ports, the 5VSB power source of your power
supply must support
≥
1.5A.
•
If you are using the Wake-On-USB Keyboard/Mouse func-
tion for 3 or more USB ports, the 5VSB power source of
your power supply must support
≥
2A.
