28
2
Hardware Installation
RJ45 LAN
2.5.2 RJ45 LAN Port
The system board is equipped with an onboard RJ45 LAN port at
location CN7 of the system board. It allows the system board to
connect to a local area network by means of a network hub.
BIOS Setting
Enable or disable the onboard LAN in the Integrated Peripherals
submenu (“SIS OnChip PCI Device” section) of the BIOS. Refer
to chapter 3 for more information.
To wake up the system via the LAN port, set the “Resume On
LAN” field (“PM Wake Up Events” section) in the Power Man-
agement Setup submenu of the BIOS to Enabled.
Driver Installation
Install the “LAN Drivers”. Refer to chapter 4 for more informa-
tion.
W
