53
3
Award BIOS Setup Utility
IDE HDD Auto Detection
Detects the parameters of the drive. The parameters will
automatically be shown on the screen.
IDE Primary Master/Slave and IDE Secondary Master/Slave
The drive type information should be included in the documentation
from your hard disk vendor. If you select Auto, the BIOS will auto-
detect the HDD & CD-ROM drive at the POST stage and show
the IDE for the HDD & CD-ROM drive. If a hard disk has not
been installed, select None.
Access Mode
For hard drives larger than 528MB, you would typically select the
LBA type. Certain operating systems require that you select CHS or
Large. Please check your operating systems manual or Help desk on
which one to select.
The settings on the screen are for reference only. Your version may not be identical
to this one.
