Operating instructions:
1. Set up side margin, punch margin, and pull-
pins according to the document being bound.
Insert sheets to be bound into punch throat, flush
against inner wall and then line up against the
side margin guide. Pull the handle to punch
sheets (up to 25 sheets, 20-lb. bond paper).
2. Place binding comb onto the comb posts at the top of the
machine, spine facing away from the operator and comb
opening facing upward, and move the binding handle to open
the comb.
3. Insert the punched document sheets onto the comb
element and, when all desired pages are loaded onto the
comb, move the binding handle back to close the comb.
Binding is completed.
4. To unbind, edit, and rebind documents, repeat step 2,
remove sheets for revision and/or add new sheets desired,
and close the comb again (per step 3) to finish rebinding the
document.
For service or warranty, please contact DFG at:
Phone: (800) 480-4334
Email: [email protected]
Thank you for purchasing your DFG comb machine.
1260 Kempar
,
Madison Heights
, MI 480
71
, U.S.A. Phone: 248-733-0400, Fax: 775-587-5352
Email: [email protected] Website: www.dfgus.com
