DFC Premio, Manual, Page: 5 / 12

S2
S2
S3
Step 1 Installing the upright frame
Abutting Joint
S3
S3
Upright and secure the upright frame into the stabilizer with Hex Bolt M8x50mm teeth 12mm
(S2) and Hex Bolt M8x16mm(S3) back sides.
Important : While assembly, it need two person work together. One people hold the computer
and another one tighten the bolts with the Allen Wrench (S1) provided.
Step 2 Installing the Computer
Connect the Signal Wire from the computer to the Signal Wire from the upright frame first .
Then, secure the computer into the upright frame with two Hex Bolt M8x16mm (S3) back
sides. Tighten the bolts with the Allen Wrench (S1) provided.