DEZEGA CARBO S-60MP1-ISG-AUENAU-BKO, User Manual

Page: 18 / 92

CARBO DEZEGA
18
15. MARKING
CARBO is marked on the coupling strap, front bumper, cover plate, rear bumper, top and bottom lids
with the following information:
• On the coupling strap:
«DEZEGA»:
«CARBO 60»:
«S-60MP1-NSG» or
«S-60MP1-ISG»:
EN 13794:2002:
:
0477:
«Made in Turkey»:
«60 min»:
«K»:
«S»:
«SSSSS P MM YY»:
trade mark;
designation of the self-rescuer;
type identification marking. Article explanation are given
in Section 18;
reference standard used for the design and certification of the PPE;
marking of conformity;
identification number of Notified Body involved in the control
procedure according to REGULATION 2016/425/EU;
inscription that indicates country of manufacturing;
nominal rated duration;
symbol that means that device uses chemical oxygen to produce
oxygen and absorb carbon dioxide (KO
2
device);
symbol that means that the self-contained self-rescuer is designed
for underground use;
serial number, where
SSSSS is the sequential number (consecutive
number 00001-99999), P is the producer code ( T is Turkey,
R is Russia), MM is the month, YY is the year of manufacture;
«2,9 kg»:
«MDR 0001641 BA»: weight of the self-rescuer;
registration number (for Australia and New Zealand);
• On the front bumper:
«DEZEGA»:
Reflective label with
the donning procedure
pictogram:
trade mark;
stickers that reflect light where the donning procedure
is indicated;
• On the cover plate:
«DEZEGA»: trade mark;
• On the cover plate for Australia and New Zealand:
«Supplied by
MineArc»:
name of the supplier;
• On the top and bottom lids
Stickers with
arrows
stickers that indicate directions for removing the lids (in case
of a version without moisture indicators).
Package marking includes:
• handling signs: «Fragile. Handle with care»; «This side up»;
«Protect from heat»; «Keep dry»; warning sign «Do not throw»;
• basic, additional and informational inscriptions.
The lock lever of the CARBO self-rescuer coupling straps is sealed with a special plate by the original
equipment manufacturer or an authorized service centre. The plate should be kept intact until the end
of SCSR service life. The plate can be removed only while donning the self-rescuer.
CARBO self-rescuers with missing seal are not accepted for service and not considered
as warranty case.