DIMAX804KC User’s Manual
DEXON Systems
13
User Presets Tab:
The User Presets can be named, saved and deleted on this tab.
Remote Control Tab:
The password can be changed in this section. The default pa
ssword is “dexon”.
The IP address uniquely identifies the module.
Serial Port Tab
The preferences of the serial port are adjustable on this tab. The adjustable parameters are:
Baud Rate, Databits, Parity, Stopbits and Flow Control.
Date & Time Tab
You can set the current time and date. You can change the parameters of Wake Up and
Standby function.
Effects Tab:
The desired transition, open and close effect can be chosen: Cut or Fade.
Extra Tab:
You can upload a small image for user interface logo (maximum 1 MB, *.png).
You can export the current configuration to a file through this web based application, and load
the configuration from a local file (*.xml)
You can reset the product’s settings to its factory default values.
You can activate the standby mode or start restart or shutdown method.
OSD Tab
The OSD panel visualization parameters can be set on this tab. The OSD panel can be seen on
all the output displays. With the help of Show OSD parameter the visualization can be turned on
or off permanently, or can be set to display automatically. In this case the OSD panel is
visualized temporarily in every situation when the content of the panel changes. The display
period can be set in seconds with the time parameter.
The position of the OSD panel can be specified with the coordinates of top-left corner. The left
and top parameters are counted in percentage of the full dimensions of the output image. The
background colour, the text colour and the highlighted colour can also be specified here.
Test Mode Tab
This page can be used to test or demonstrate with automatic settings of different parameters of
the device. The sequence of different settings can be generated with a single mouse click over
the OK button. To recall the generated sequence of settings can be automatically scheduled by
pressing the Play button. The operator can walk through the list settings manually also.
Logging Tab
You can switch on or out the logging procedures. The device has 6 levels of logging. Log files
can be recalled for each day by choosing the date and pressing Get Log File button.
Info Tab:
This tab displays the current input timing and provides special information about the product
(App version, temperature, etc.). If the tab is visible, it is updated in every 5 seconds.