2 Introduction
the X-ray beam. The cable length of the optional remote exposure button is approximately 10 m (32 ft).
The operator should maintain visible contact with the patient and technique factors. This allows immediate
termination of radiation by the release of the exposure button in the event of a malfunction or disturbance.
WARNING:
This x-ray device may be
dangerous to patient and operator
unless safe exposure factors
and operating instructions are
observed.
2.10 Manufacturer's liability
As a manufacturer we can only assume liability of safe and reliable operation of this device when:
• The device installation was performed by authorized technician according to the Installation manual
• The device is used according to this user manual.
• Maintenance and repairs are performed by authorized service technician.
• Original or authorized spare parts and accessories are used with the device.
If service on the device is performed, a work order describing the type and extent of repair must be
provided by the service technician. This must contain information of changes of nominal data or work
range performed. The work order must furthermore indicate the date of repair, the name of the company
concerned and a valid signature. User should keep this work order for future references.
2.11 Disposal and recycling
When the unit does no longer meet the manufacturer's intended operational specifications, despite proper
maintenance and repair, then the unit is no longer serviceable and should be replaced. Follow all regulations
on disposal of waste parts.
The device has at least the following parts that should be regarded as non-environmentally friendly waste
products:
• X-ray source assembly
• All electronic circuits and electronic boards
• Plastic parts
FOCUS
™
11
