Page 26 / 34 Chengdu Dexin Digital Technology Co., Ltd
NDS3211B MPEG-2/H.264 HD Encoder User Manual
buffer, the time of system latency will be raised about 200ms.
Parameter -> Output Setting.
Click
“Output Setting
” on the top column and it displays interface as Figure-6. User can set the
output parameters by inputting a value or selecting a mode in the pull-down list.
Figure-8
System -> Save/Load Config
Click “
Save/Load Config
” on the top column and it displays interface as Figure-12 where user
can save new configuration or load existing configuration as per prompts.
Figure-6
System ->Update Software
Click “
Update Software
” on the top column and it displays interface as Figure-14 where user can
update the software for the device. Click browse button to find the update file and click “Update”
button to start updating.
Disable: Program stream will not
output from IP port, just output
from ASI Port.
Output bitrate.
Range:0.5Mbps-to 60 Mbps
The value should be larger
than Encode Bitrate.
Summary of Contents for NDS3211B
Page 4: ......
