Dexing FiberLabs NDS3107C, User Manual

Page: 6 / 23

NDS3107C Multiplexer User Manual
Chapter 2 Installation Guide
2.1 Acquisition Check
When user opens the package of the device, it is necessary to check items according to packing
list. Normally it should include the following items:

NDS3107C Multiplexer
 User’s Manual
 ASI Cable
 Power Cord
If any item is missing or mismatching with the list above, please contact local dealer.
2.2 Installation Preparation
When users install device, please follow the below steps. The details of installation will be
described at the rest part of this chapter. Users can also refer rear panel chart during the
installation.
The main content of this chapter includes:
 Checking the possible device missing or damage during the transportation
 Preparing relevant environment for installation
 Installing multiplexer
 Connecting signal cables
 Connecting communication port (if it is necessary)
2.2.1 Device’s Installation Flow Chart Illustrated as following
：
2.2.2 Environment Requirement
Item Requirement
Machine Hall Space
When user installs machine frame array in one machine hall, the
distance between 2 rows of machine frames should be 1.2~1.5m
4