NDS357X IRD User
‟s Manual
11 / 41
3.2 General Setting
Switch on the device and after a few seconds‟ initialization, it presents start-up pictures as
below:
IRD
: Device‟s name
Bitrate: xx.xxx Mbps
indicates the current output bitrate.
Press LOCK key on the front panel to enter the main menu. The LCD will display the
following pages where user can configure the parameters for the device:
User could do all the settings according to the 8 directions displayed on the LCD. User can
press UP/DOWN buttons to specify menu item, and then press ENTER to enter the
submenus as below:
3.2.1 Status
Alarm:
The alarm indicator will turn on if there is no signal inputting or outputting bit rate
overflows. User then can enter this menu to check the error type. Otherwise it shows the
„system is normal‟.
Uptime:
It displays the working time duration of the device. It times upon power on.
Start up
…
Start OK
…
IRD
Bitrate: xx.xxx Mbps
Alarm
System is normal
Uptime
1 Day(s) 03:30:02
Main Menu
1 Status
2 Input Sets
3 CI Card
4 BISS Descrambling
5 TS Config
6 IP Stream
7 Network
8 System
