Dexin NDS3524, User Manual

Page: 9 / 14

7
CHAPTER 3 Operations and Management
NDS3524 is controlled and managed through the key board and LCD display.
LCD Display – It presents the selected menu and the parameter settings. The backlight in the
display is on when the power is applied.
LED – These lights indicate the working status

Power: It lights on when the power supply is connected.
 Alarm: It lights on when the there is error, such as the signal source loss.
 USB: It lights on when the USB properly connected and detected.
Left/Right/Up/Down buttons – Use these buttons to turn the screen pages, shift the target
items by moving the triangle, or change the parameter settings in the program mode. Enter
– Use this button to enter a submenu or save a new setting after adjustment; press it to start
adjusting the value of certain items with Up/Down buttons when the corresponding
underline flash;
Press it to activate the hidden selections and change the setting with Up/Down (or Left/
Right) buttons.
Audio Bit rate Enter Audio Bit rate Enter Audio Bit rate Audio Bit rate
128 *128 ► 128 ► 192
Menu – Press this button to step back
Lock – Locking the screen / cancelling the lock state, and entering the main menu after the
initialization of the device. After pressing lock key, the system will question the users to save
present setting or not. If not, the LCD will display the current configuration state.
Hue
1
Hue
+
0
01
Hue
+
00
1
Hue
+
00
2
Enter
►