background image

 

1

Restorable Optical Cordless Mouse 

USER’S MANUAL 

Model #: MWP41-L

 

 

System Requirement 

  Mouse compatible with standard Microsoft OS 

 

3

rd

 button and wheel function require Win 98/ 2000/ ME/ NT/ XP 

 

Compatible with MAC 

 

Before you begin 

  Keep this installation guide for future reference! It contains Important 

Troubleshooting Information. 

  Keep your old PS/2 mouse as a back-up device.

 

 

Getting Started 

Congratulations on your purchase of an 800dpi restorable Cordless Optical 

Mouse. By using the advanced RF technology a 360°operation is possible and 

no line-of-sight is required between the receiver and the mouse. The 800dpi 

high resolution will bring users the best operation accuracy and efficiency, 

especially when the pixel of display over 1024*768 pixel. It operates at twice the 

speed and only requires 1/4 of the space in comparison to a 400dpi mouse. 

Battery or current consumer is always the key issue for a wireless product. In 

MWP41-L, two methods designed for power saving, the patent of ID power on/ 

off function and receiver store switch. 

MWP41-L can be power off by pressing ID button for 3 sec. There is a 

switch is the reviver store. By putting the receiver into the mouse, the power can 

be shout down. The way to open the top cover and store the receiver is other 

unique patent showing this mouse. By these special designs you will find it is so 

good to have a mouse like MWP41-L. 

Summary of Contents for MWP41-L











Reviews: