MOTOR UNIT
BLADE ASSEMBLY
MIXING BOWL
GASKET: Resides in blade assembly.
Insure gasket is firmly in
place
before each use
.
STORAGE LID
2) TO USE
- Place the ingredients inside the bowl (Do not overfill). NOTE: Pour a small amount of liquid into bowl before
activating to facilitate smoother blending.
- Screw the blade assembly securely onto the bowl.
-
IMPORTANT - RE: GASKET
BEFORE EACH USE, insure gasket is firmly inserted into groove located inside the
perimeter of the blade assembly, which surrounds the blade area, to avoid leakage.
- Flip the bowl and blade assembly over and place onto the motor unit. Make sure the three tabs on the bowl fit into
the three recesses in the motor unit.
- Plug the cord into 120V AC outlet.
- Press down on the bowl, and the processor starts up immediately.
a. For fruits and vegetables grind a maximum of 10 seconds.
b. For cooked meat grind a maximum of 15 seconds.
- Press down on the bowl for no more than 30 seconds at a time, followed by a 1 minute cool-down period.
This is important to prevent the motor from overheating. Do not exceed 10 on/off cycles per session.
- Unplug the unit, and wait for the blade to stop completely.
- Remove the bowl and blade assembly from the motor unit, and unscrew the blade assembly from the bowl.
Feed your baby directly out of the mixing bowl or cover the bowl with a storage lid and refrigerate. Do not place
mixing bowls in freezer or microwave.
CLEANING INSTRUCTIONS
Wash the lids, mixing bowls and blade assembly in warm soapy water.
Containers and lids are dishwasher safe -
TOP RACK ONLY.
DO NOT CLEAN WITH ABRASIVE CLEANERS OR HARD IMPLEMENTS. Rinse and dry all
parts thoroughly. DO NOT immerse the motor base in water. Wipe motor base with damp sponge or cloth. Do not
perform any other servicing. Return to DEX if there is a problem and if the unit is within the warranty period.
