Dewhot NDCT16DH, Instructions Manual

Page: 3 / 30

Page 3 of 30
Dewhot | Gas geyser manual
Read these instructions carefully before operating the
gas geyser and familiarize yourself with the appliance
before connecting it to the gas cylinder. Keep these
instructions for future reference.
This appliance is manufactured to operate on LPG
only. Do not tamper or modify the appliance. Never
install this appliance indoors.
If you smell gas
1. Turn off the gas supply at the bottle
2. Extinguish all naked flames
3. Do not operate any electrical
appliances
4. Ventilate the area
5. Check for leaks as described in this
manual
6. If gas smell persists, contact your
dealer or gas supplier immediately
Burn-back
In the event of a burn-back, where the
flame burns back to the jet, immediately
turn the gas supply off at the gas cylinder.
After ensuring the flame is extinguished,
wait for I minute and then reignite the
appliance as per normal. Should the
appliance burn back again, close the gas
cylinder and call a registered LPG installer.
Do not use the appliance again until the
installer has confirmed that it is safe to
do so.
Gas-pressure regulator
This appliance requires an operating
pressure of 2,8 kpa. Only install a LPG
regulator that complies with the
SANS 1237 requirements.
Guarantee
After installation, please register your
product on the Dewhot website (www.
gasgeysers.co.za/product-registration)
You will need your invoice and Certificate
of Compliance (COC) to complete the
registration.
Important