DS-TACHO-4
TECHNICAL REFERENCE MANUAL
L: Ensure that you have all items required at your disposal, i.e. the sensor, the probe, and the two
hand-pieces for optical fixation
M: Put the two hand-pieces down if they are on the optical head of the sensor
N: Insert the two optical fibres with their respective rivets
O: Screw the first hand-piece on and tighten moderately; a little gap between the rivet head and the
optical head is normal
P: Remove the two fibres in order to allow for mounting of the second hand-piece
Q: Make sure that the two fibres and their rivets are assembled correctly
R: Hold both probe and sensor simultaneously when inserting the rubber sleeve to avoid damaging the
two optical fibres on the level of the rivets.
4.2. Using the Tripod
To mount the probe to the Tripod, you need the 6mm Adapter sleeve.
First put the adapter sleeve over the probe and then mount it in the Tripod.
Image 7: Using the Tripod
DS-TACHO-4 V20-1
8/20
