OKINAP System Quick Guide
04.12.2017
xxxxx
2 /
6
SENSOR BOX
Connection ports and functions
Technical specifications
1. Cable connection for Multi-funtion port
2. Cable connection for optional Ambient Box
3. Cable connection for Furniture Sensor left
4. Cable connection for Furniture Sensor right
5. Reset button / Pairing button
6. Function LED
Input voltage
29 V DC
Protection class
III
Protection degree
IP20
Length x width x height 148 x 114 x 39 mm
Automatic teach-in
Connect the Sensor Box to the control unit and put the power plug into
the socket.
The system will be in pairing mode for 120sec to pair a
Bluetooth
®
device. A successful completion is signaled by the blinking of the LED.
Open the Sensor Box app on your mobile device and follow the
instructions to pair with the system.
The LED switches off when the
Bluetooth
®
pairing process has timed
out or when no device is connected.
If the device is successfully connected to the system, the LED
permanently lights.
Repeat the automatic teach-in process. First, remove the plug from the
power supply. Then wait 60sec and insert the plug back into the power
supply. You can now start the new teach-in process.
Manuel teach-in
The system must be connected to the power supply.
Quickly press the
button (6) twice
on the Sensor Box, the LED will
blink. The system is now in pairing mode for 120 seconds to pair the
Bluetooth
®
device.
Open the Sensor Box app on your mobile device and follow the
instructions to pair with the system.
The LED switches off when the
Bluetooth
®
pairing process has timed
out or when no device is connected.
If the device is successfully connected to the system, the LED
permanently lights.
3
1
2
4
5
6
