Before programming, all settings should be reset. The reset hole which is
identified by “R” is just located below the “R/RECALL” button. Use a paper
clip or ball point pen to stick it. See Figure 1.
1. Reset
Before initial use, plug the timer in for at least 30 minutes to charge the
internal battery. After the screen displays, the unit is ready for programming.
2. Set the Current Time
a. Keep the “CLOCK” button pressed the entire setting operation.
b. Press the “HOUR” button to set hours.
c. Press the “MIN” button to set minutes.
d. Press the “WEEK” button to select the correct day of the week.
e. Release the “CLOCK” button. The time will be set.
Overload Protection
Switch
Indicator
Outlets
Summary of Contents for HOYS22A
Page 1: ...HOYS22A Digital...
