5.Use electrical tape to connect the
Black Wire and White Wire of the
High Voltage Wiring Compartment
with your live and neutral wires
seperately, then place these
connected wire in the High Voltage
Wiring Compartment.(Figure 4)
6.Use the included wiring caps to connect
the output line of the transformer with
your load input line, then place the
connected line in the Low Voltage
Wiring Compartment.(Figure 5)
Note: (1) If the load has a ground wire,
connect the ground wire to the Ground
Terminal.
(2)Do not remove the terminal block of
the unused output line port, or it will
cause short circuit.
7.Turn on the main circuit.
8.Use a screwdriver to install the metal
cover on the front of the transformer.
(Figure 6)
03
Figure 4
Figure 5
Figure 6
