DeWalt XR DCB094K, Original Instructions Manual

Page: 52 / 120

50
EnGLIsh
C
Lubrication
Your USB charger requires no additional lubrication.
MAINTENANCE
Your USB charger has been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper care and
regular cleaning.
WARNING: To reduce the risk of serious personal injury, disconnect battery
pack before making any adjustments or removing/installing attachments or
accessories.
An accidental start-up can cause injury.
The charger and battery pack are not serviceable.
Belt Clip ( Fig. C)
WARNING:
To reduce the risk of serious personal injury, ensure the screw holding the
belt hook is secure.
IMPORTanT:
When attaching or replacing the belt hook 10 , to the D
e
WALT USB charger, use
only the screw 11 that is provided. Be sure to securely tighten screw.
If the hook is not desired at all, it can be removed from the D
e
WALT USB charger.
To remove the belt hook, remove the screw 11 that holds the belt hook in place.
nOTE: Do not plug in devices that exceed the output ratings on the power source’s
label.
Doing so will shorten the USB charger's useful life.
D
e
WALT batteries will charge, via the USB Type C port from most USB power supplies. Some
power supplies may require a different cable not supplied with this kit, and may charge at
a slower rate.
Charging a Device
Insert a USB plug into the USB Type‑A port 4 or bi‑directional USB Type‑C port 5 to supply
power or charge your devices.
nOTE: There will be no LED indication while supplying power to or charging user devices.
LEDs will only illuminate when charging D
e
WALT batteries.
nOTE: The USB ports will shut down and the yellow LED will blink if the battery pack
temperture is out of acceptable range.
*** Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and
other countries.
****
Apple is a trademark of Apple Inc.