DeWalt DXGSE, Operator'S Manual

Page: 16 / 104

16
ENGLISH
Assembling and Using the
Shoulder Strap
Assembling the Shoulder Strap
1. Push the strap up through the center slot in
the buckle (Fig. 6).
2. Bend the strap over and push it down
through the lower slot in the buckle (Fig. 6).
Using the Shoulder Strap
1. Put the shoulder strap over the operator’s
head and onto the left shoulder (Fig. 8).
2. Start the unit. Refer to Starting and Stopping .
3. Snap the clip onto the shoulder strap /
harness loop (Fig. 7).
4. Adjust the shoulder strap to fit the operator
(Fig. 9). Pull the buckle up to loosen the
shoulder strap. Pull the strap down to
tighten the shoulder strap.
Fig. 6
Fig. 7
Strap
Buckle
Clip
Center Slot
Lower Slot
Shoulder Strap / Harness Loop
Clip
ASSEMBLY - Continued