background image

Safety

Owner’s Manual for Portable Generator

3

RISK OF ELECTROCUTION OR SHOCK

THIS GENERATOR SET PRO-
DUCES ELECTRICAL CURRENT. 

THEREFORE, SAFETY GUIDELINES MUST BE FOL-
LOWED. IMPROPER USE OF THIS GENERATOR CAN 
RESULT IN ELECTROCUTION, INJURY OR DEATH. 
DO NOT OPERATE, SERVICE OR REPAIR THIS GEN-
ERATOR UNLESS FULLY QUALIFIED TO DO SO.

THIS GENERATOR SET IS 
DESIGNED TO BE OPERATED IN 

DRY CONDITIONS AND FOR OUTDOOR AREAS 
ONLY. NEVER OPERATE THIS GENERATOR 
INDOORS. NEVER OPERATE THIS GENERATOR IN 
RAIN, SNOW, SLEET OR GENERALLY WET CONDI-
TIONS. DAMAGE TO THE GENERATOR, BODILY 
INJURY, OR DEATH COULD RESULT FROM ELEC-
TROCUTION.

IF THIS GENERATOR IS CON-
NECTED TO A BUILDING, HOME, 

BUSINESS, OR ANY OTHER ELECTRICAL CIRCUIT 
NORMALLY FED BY UTILITY POWER, STEPS MUST 
BE TAKEN TO ENSURE THE GENERATOR OUTPUT 
AND THE UTILITY POWER ARE POSITIVELY ISO-
LATED. THIS IS TYPICALLY ACCOMPLISHED 
THROUGH THE USE OF A PROPERLY INSTALLED 
TRANSFER SWITCH. FAILURE TO ISOLATE THE 
UTILITY AND GENERATOR ELECTRICAL SYSTEMS 
WILL RESULT IN GENERATOR DAMAGE AND COULD 
RESULT IN INJURY OR DEATH TO UTILITY WORK-
ERS DUE TO THE BACKFEED OF ELECTRICITY.

TO AVOID BACKFEEDING INTO 
UTILITY SYSTEMS, ISOLATION OF 

THE RESIDENCE ELECTRICAL SYSTEM IS 
REQUIRED. BEFORE CONNECTION OF A GENERA-
TOR TO THE RESIDENCE ELECTRICAL SYSTEM 
TURN OFF THE MAIN SWITCH. BEFORE MAKING 
PERMANENT CONNECTIONS A DOUBLE THROW 
TRANSFER SWITCH MUST BE INSTALLED. TO AVOID 
ELECTROCUTION OR PROPERTY DAMAGE, ONLY A 
TRAINED ELECTRICIAN SHOULD CONNECT GENER-
ATOR TO RESIDENCE ELECTRICAL SYSTEM. CALI-
FORNIA LAW REQUIRES ISOLATION OF THE 
RESIDENCE ELECTRICAL SYSTEM BEFORE CON-
NECTING A GENERATOR TO RESIDENCE ELECTRI-
CAL SYSTEMS. TEMPORARY CONNECTION NOT 
RECOMMENDED DUE TO BACKFEEDING.
ALWAYS  FOLLOW  LOCAL  CODES  AND  REGULA-

TIONS  THAT APPLY  TO  THE  INSTALLATION  OF ANY

ITEM THAT CONCERNS THIS PRODUCT.

1.

NFPA  37  -  Standard  for  Installation  and  Use  of  Stationary

Combustible Engines.

2.

Agricultural  Wiring  handbook  of  Farm  Standby  Electric

Power.

DO NOT MODIFY OR MISAPPLY 
YOUR GENERATOR SET. OPERA-

TION OF THE GENERATOR OTHER THAN INTENDED 
COULD RESULT IN GENERATOR SET DAMAGE, 
BODILY INJURY OR EVEN DEATH FROM ELECTRO-
CUTION.

NEVER TOUCH A RECEPTACLE OR 
BARE WIRE. ELECTROCUTION OR 

SHOCK COULD RESULT.

RISK OF FIRE OR EXPLOSION

ALWAYS INSURE THAT AT LEAST 6 
FEET OF CLEARANCE ON ALL 

SIDES OF THE GENERATOR ARE MAINTAINED 
DURING OPERATION. FAILURE TO MAINTAIN 
PROPER CLEARANCE COULD DAMAGE YOUR GEN-
ERATOR AND POTENTIALLY LEAD TO FIRES.

GASOLINE IS HIGHLY FLAMMABLE 
AND ITS VAPORS ARE EXPLOSIVE. 

FAILURE TO PROPERLY HANDLE GASOLINE CAN 
RESULT IN EXPLOSION OR FIRE. DO NOT PERMIT 
SMOKING WITHIN 50FT OF THIS GENERATOR SET.

NEVER REFILL A HOT GENERA-
TOR WITH FUEL. NEVER REFILL 

THE GENERATOR WHILE IT IS RUNNING. SPILLAGE 
ONTO THE ENGINE OR GENERATOR COULD 
RESULT IN AN EXPLOSION OR FIRE. ALWAYS 
ALLOW THE GENERATOR SET TO COOL BEFORE 
REFILLING.

DO NOT STORE THIS GENERATOR 
SET IN ANY LOCATION WHERE 

GASOLINE FUMES COULD POTENTIALLY COME 
INTO CONTACT WITH SPARKS, A PILOT LIGHT OR 
AN OPEN FLAME. IMPROPER STORAGE OF THIS 
GENERATOR COULD RESULT IN AN EXPLOSION OR 
FIRE.

INSPECT THE SPARK ARRESTOR 
PERIODICALLY. SPARK ARRES-

TORS ARE REQUIRED IN SOME AREAS AND MINI-
MIZE THE RISK OF FIRE FROM SPARKS EMITTED 
FROM THE EXHAUST.

DO NOT OPERATE THIS GENERA-
TOR IF THE AMBIENT TEMPERA-

TURE EXCEEDS 104ºF/40ºC.

DO NOT EXCEED THE RATED 
CAPACITY OF THE GENERATOR. 

THE TOTAL ELECTRICAL LOADS AT EACH OUTLET 
MUST BE ADDED TO DETERMINE THE TOTAL ELEC-
TRICAL LOAD. THE TOTAL LOAD MUST NOT 
EXCEED THE RATED CAPACITY OF THE GENERA-
TOR. IF THE DRIVEN APPARATUS DOES NOT LIST 
WATTAGE, BUT ONLY AMPERAGE, WATTAGE MAY 
BE DETERMINED BY MULTIPLYING AMPERAGE 
TIMES VOLTAGE (WATTS = AMPS X VOLTS).

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING

Summary of Contents for DXGNR4000

























Reviews: