14
English
•
Use pipe that is the same size as the air tank outlet. Piping that
is too small will restrict the flow of air.
•
If piping is over 100’ (30.5 m) long, use the next larger size.
•
Bury underground lines below the frost line and avoid pockets
where condensation can gather and freeze. Apply pressure
before underground lines are covered to make sure all pipe
joints are free of leaks.
•
A flexible coupling is recommended to be installed between
the globe valve/air discharge outlet and main air distribution
line to allow for vibration.
•
A separate regulator is recommended to control the air
pressure. Air pressure from the tank is usually too high for
individual air driven tools.
•
DO NOT install lubricators between the tank and any spray
equipment, air tool or accessory requiring oil-free filtered air.
•
Drain all traps, filters and dirt legs daily.
SPR AY
GUN
AIR
TOOL
DRAIN
LEGS
FI LTER /
MOISTURE
TRAP
DIR T
LEGS
DRAIN
VALVES
DRAIN
VALVE
LUBRIC ATOR
REGUL ATOR
GLOBE VALVE /
AIR DISCHARGE
VALVE
MA N DISTRIBUTION AIR L NES
Slope pipe in di rection of air flo w
Water condensate flows along
bottom of pipe to drain legs
prevent ng t f rom enter ng feeder
lines
REGUL ATOR
BALL
FI LTER
FLEXIBLE
COUPL NG
DRAIN
VALVE
TYPICAL
COMPRESSED AIR
DISTRIBUTION
SYSTEM
A R FLOW
AIR FLOW
FEEDER LINES SLOPE
WITH AIR FLOW
AIR USAGE
L NES
AIR
COMPRESSOR
FI LTER /
MOISTURE
TRAP
FOR BEST PERFORMANCE
the d stance between the
comp ressor and the
moistu re trap should be as
long as possib e
RISK OF BURSTING A
LWAYS USE
ME TAL PIPING AND FITT NGS
DRAIN
VALVES
5 MICRON
FI LTER
01 M CRON
FI LTER
How to Use Your Unit (Fig 3)
How to Stop:
Set the Auto/Off switch to “Off”.
Before Starting
WARNING:
Do not operate this unit until you read this instruction
