17
EngLIsh
Proper hand position requires one hand on each dual handle
5
.
Running the Mixer (Fig. A)
WARNING:
• Do not use this tool to mix or pump easily combustible
or explosive fluids (benzine, alcohol, etc.).
• Do not mix or stir inflammable liquids
labelled accordingly.
• Always check the flammability warnings on any
product before attempting to mix.
1. Hold the mixer with both hands.
2. To start the unit, press the lock off lever
2
and then the
trigger
1
can be pulled in, turning on the unit.
3. To stop the tool, release the trigger.
During the mixing process you should guide the mixer around
the container to ensure a more consistent mix. Continue until all
of the material is completely mixed.
nOtE:
Please follow the processing instructions of the
manufacturer of the material.
Always be aware that the greater the viscosity of the material,
the greater the impact of the torque forces on the mixer.
Proper Hand Position (Fig. C)
WARNING:
To reduce the risk of serious personal injury,
ALWAYS
use proper hand position as shown.
WARNING:
To reduce the risk of serious personal
injury,
ALWAYS
hold securely in anticipation of a
sudden reaction.
OPERATION
Instructions for Use
WARNING:
Always observe the safety instructions and
applicable regulations.
WARNING:
To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories.
An accidental
start-up can cause injury.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories.
An accidental
start-up can cause injury.
Description (Fig. A)
WARNING:
Never modify the power tool or any part of it.
Damage or personal injury could result.
1
Variable speed trigger switch
2
Lock off lever
3
Variable speed dial
4
Paddle holder
5
Dual handle
Intended Use
Your dual handle paddle mixer is designed for professional
mixing applications.
DO nOt
use under wet conditions or in the presence of
flammable liquids or gases.
Your dual handle paddle mixer is a professional power tool.
DO nOt
let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm.
This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Date Code Position (Fig. A)
The date code
6
, which also includes
the year of manufacture,
is printed into the housing.
Example:
2019 XX XX
Year of Manufacture
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Inserting and Removing a Paddle (Fig. B)
1. Insert the paddle thread into paddle holder
4
by turning
it clockwise.
2. Tighten the paddle with the 2 included wrenches.
3. To remove the paddle, proceed in reverse order.
D
e
WALT ToolConnect Tag Ready (Fig. D)
Optional Accessory
Your mixer comes with mounting holes
7
and screws
for installing a
D
e
WALT
ToolConnect Tag. You will need
a cross bit tip to install the tag with the provided screws.
The
D
e
WALT
ToolConnect Tag is designed for tracking and
locating professional power tools, equipment, and machines
using the
D
e
WALT
Tool Connect app. For proper installation
of the
D
e
WALT
ToolConnect Tag refer to the
D
e
WALT
ToolConnect manual.