6
E
D
B
A
J
I
FIG. 1
H
G
F
C
L
K
M
INTENDED USE
This heavy-duty circular saw is designed for professional wood cutting applications.
DO NOT
use water feed attachments with this saw.
DO NOT
use abrasive wheels
or blades.
DO NOT
use under wet conditions or in presence of flammable liquids or
gases.
This heavy-duty saw is a professional power tool.
DO NOT
let children come into
contact with the tool. Supervision is required when inexperienced operators use this
tool.
ADJUSTMENTS
Changing Blades
WARNING: To reduce the risk of serious personal injury, turn tool off and
disconnect tool from power source before making any adjustments or removing/
installing attachments or accessories.
An accidental start-up can cause injury.
N
J
O
FIG. 2
K
I
FIG. 3
TO INSTALL THE BLADE (FIG. 2–5)
1. Using the lower guard lever (K), retract the lower blade guard (I) and place blade
on saw spindle against the inner clamp washer (N), making sure that the blade will
rotate in the proper direction (the direction of the rotation arrow on the saw blade
and the teeth must point in the same direction as the direction of rotation arrow on
the saw). Do not assume that the printing on the blade will always be facing you
when properly installed. When retracting the lower blade guard to install the blade,
check the condition and operation of the lower blade guard to assure that it is
working properly. Make sure it moves freely and does not touch the blade or any
other part, in all angles and depths of cut.
2. Place outer clamp washer (O) on saw
C
FIG. 4
spindle with the beveled edge facing out.
Make sure the 20 mm diameter on the
blade side of the clamp fits into the
20 mm hole in the saw blade to ensure
centering of the blade.
3. Thread blade clamping screw (J) into saw
spindle by hand (screw has right-hand
threads and must be turned clockwise to
tighten).
Summary of Contents for DW995K
