E N G L I S H
19
en - 4
Have defective cords replaced immediately
+40 ˚c
+4 ˚c
Charge only between 4 °C and 40 °C
Discard the battery pack with due care
for the environment
Do not incinerate the battery pack
Package contents
The package contains:
1 Cordless midhandle driver/(percussion) drill
1 Charger
1 Battery pack (K and KH models)
2 Battery packs (K2 and K2H models)
1 Side handle (DW988/DW989)
1 Kitbox
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. A)
Your cordless driver/(percussion) drill has been
designed for professional drilling and screwdriving
applications.
1 Variable speed switch
2 Forward/reverse slider
3 Keyless chuck/auto spindle lock
4 Mode selector/torque adjustment collar
5 Collar settings
6 Three-gear selector
7 Bit holder
8 Grip
9 Side handle (DW988/DW989)
10 Battery pack
Charger
Your DE9107 charger accepts D
E
WALT NiCd
battery packs ranging from 7.2 V to 14.4 V.
Your DE9108/DE9117 charger accepts D
E
WALT
NiCd battery packs ranging from 7.2 V to 18 V.
Your DE9116 charger accepts D
E
WALT NiCd and
NiMH battery packs ranging from 7.2 V to 18 V.
10 Battery pack
11 Release buttons
12 Charger
13 Charging indicator (red)
Auto-spindle lock
The auto-spindle lock is engaged when the
transmission is stationary. The chuck sleeve can
easily be turned with one hand while the other
supports the unit.
Electrical safety
The electric motor has been designed for one
voltage only. Always check that the battery pack
power corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your D
E
WALT charger is double
insulated in accordance with EN 60335.
Mains plug replacement
(U.K. & Ireland only)
• Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
D
E
WALT repair agent or a qualified electrician.
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
• Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
• The cable wire colours, or a letter, will be marked
at the connection points of most good quality
plugs. Attach the wires to their respective points
in the plug (see below). Brown is for Live (L) (2)
and Blue is for Neutral (N) (4).
• Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the
outer sheath of the cable firmly and that the two
leads are correctly fixed at the terminal screws.
DW980_989.P65
14-09-2001, 08:37
23
Summary of Contents for DW980
Page 1: ... DW980 DW981 DW984 DW985 DW987 DW988 DW989 DW980_989 P65 14 09 2001 08 36 1 ...
Page 3: ...A 2 6 5 4 3 7 1 8 10 2 6 5 4 3 7 1 8 10 11 10 12 13 DW980_989 P65 14 09 2001 08 36 3 ...
Page 4: ...6 1 3 2 15 16 5 2 B D E C DW980_989 P65 14 09 2001 08 36 4 ...
Page 98: ...DW980_989 P65 14 09 2001 08 40 98 ...
