16
en - 3
E N G L I S H
Check for misalignment and seizure of moving
parts, breakage of parts and any other conditions
that may affect its operation. Have damaged
guards or other defective parts repaired or
replaced as instructed. Do not use the tool if the
switch is defective. Have the switch replaced by
an authorized D
E
WALT repair agent.
20 Have your tool repaired by an authorized
D
E
WALT repair agent
This Power Tool is in accordance with the
relevant safety regulations. To avoid danger,
electric appliances must only be repaired by
qualified technicians.
Additional safety rules for biscuit jointers
Plugging into the mains, switching ON and OFF
• Always ensure that the power tool is switched
OFF before plugging into the mains.
• Do not switch OFF before the blade is running
freely.
When cutting
• Remove all nails and metal objects from the
workpiece before starting work.
• After switching OFF, never attempt to stop the
blade by pressing against the side of the blade.
• Never put the tool down on a table or workbench
unless switched OFF.
Operational protection devices
• The tool must only be used for cutting wood or
plastic.
• Ensure that all devices screening the blade are in
perfect working order.
Checking and changing the blade
• Only blades conforming to the specifications
contained in these operating instructions may be
used.
• Blades made of high alloy, high speed steel (HSS
steel) should not be used. Best results are
achieved using carbide-tipped or CrV blades.
• Only sharp blades in perfect working order
should be used; cracked or bent blades should
be discarded and replaced at once.
• Ensure that the blade is securely fixed and
rotates in the correct direction.
Guard against kickback
• Kickback occurs when the tool begins to stall
rapidly and is driven back towards the operator.
Release the switch immediately if the blade sticks
or the tool stalls.
• Keep the blades sharp.
• Support large panels near the cutting area.
• Do not remove the tool from the workpiece while
making a cut with the blade rotating. Release the
ON/OFF-switch and wait for the blade to come
to a halt.
Package contents
The package contains:
1 Biscuit jointer groover
1 Mitre fence
1 Side handle
1 Cutting insert
1 Sickle spanner 34/36
1 Pin spanner 25
1 Dust extraction adapter
(including 2 bolts and 2 wing nuts)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. A)
Your D
E
WALT biscuit jointer groover has been
designed for making flat-dowel joints as well as for
parallel scribing and trimming in wood, wood
products and plastics.
1 ON/OFF-switch
2 Depth of cut adjuster
3 Cover plate
4 Knurled nuts
5 Fine adjuster
6 Star knob
7 Front grip
8 Dust extraction outlet
9 Parallel fence
10 Viewing opening
11 End marks
12 Locking bolts for parallel fence
Summary of Contents for DW685K
