VISUALLY EXAMINE CARBIDE BLADES BEFORE USE.
REPLACE IF DAMAGED.
COMBINATION - For general-purpose ripping and cutting.
CROSS-CUT - For smoother, faster cross cutting.
RIPPING - For fast rip cuts.
PLYWOOD - For smooth cuts in plywood. Reduce splintering.
FRAMING / RIP - For facing, roofing, siding, sub-flooring, framing, form
cutting.
PLANER - For very smooth ripping and cross-cutting.
FRICTION - For cutting corrugated, galvanized sheets.
METAL-CUTTING - For cutting aluminum, copper and other soft metals.
FLOORING - For sawing where nails may be occasionally encountered.
CARBIDE-TIPPED - For longest sawing without blade sharpening. Cuts
wood, Transite, Cemesto board, Formica, Masonite, and similar materials.
Accessories
Recommended accessories for use with your tool are available at extra
cost from your local service center.
CAUTION: The use of any non-recommended accessory may be haz-
ardous.
A complete listing of service centers is included with your tool.
If you need any assistance in locating any accessory, please contact
D
E
WALT Industrial Tool Company, 626 Hanover Pike, P.O. Box 158,
Hampstead, MD 21074 or call 1-800-732-4441.
Lubricant For Worm Drive Saws part No. DW3277 - 6 oz. tube
This special lubricant has been developed to add longer life to Worm
Drive Saw gears. See lubrication instructions.
Clamp Washers for Worm Drive Saws
A. No. 63243-00 INNER CLAMP WASHER is used on all Worm Drive
Saws when using metal or abrasive blades with round arbor holes.
B. No. 143783-00 DIAMOND INNER CLAMP WASHER is used on all
Worm Drive Saws when using metal or abrasive blades with dia-
mond shaped arbor holes.
C. No. 740457-00 OUTER CLAMP WASHER is used on all Worm
Drive Saws on the outer side of all metal or abrasive blades.
WATER FEED ATTACHMENTS ARE NOT RECOMMENDED FOR
WORM DRIVE SAWS.
Important!
To assure product SAFETY and RELIABILITY, repairs, mainte-
nance and adjustment should be performed by Black & Decker
(U.S.) Inc. industrial service centers or other qualified service orga-
nizations. These service organizations service DeWalt tools always
using DeWalt replacement parts. DeWalt tools are serviced by the
Industrial Tool Division of Black & Decker (U.S.) Inc.
Full Warranty
DeWalt heavy duty industrial tools are warranted for one year from
date of purchase. We will repair, without charge, any defects due
to faulty materials or workmanship. Arrangements have been
made with the Industrial Tool Division of Black & Decker (U.S.) Inc.
to provide warranty repairs for DeWalt tools. Please return the
complete unit, transportation prepaid, to any Black & Decker (U.S.)
Inc. Industrial Service Center or Authorized Service Station listed
under “Tools, Electric” in the Yellow Pages. This warranty does not
apply to accessories or damage caused where repairs have been
made or attempted by others. This warranty gives you specific
legal rights and you may have other rights which vary from state to
state.
11
158629-03/dw377 5/17/02 3:08 PM Page 11
