DeWalt DCS573 GB, Original Instructions Manual

Page: 7 / 24

English
5
a
WARNING:
To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury .
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury .
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury .
NOTICE:
Indicates a practice
not related to
personal injury which, if not avoided, may result in
property damage .
Denotes risk of electric shock.
Denotes risk of fire.
EC‑Declaration of Conformity
Machinery Directive
Cordless Circular Saw
DCS573
D
e
WALT declares that these products described under Technical
Data are in compliance with:
2006/42/EC, EN62841‑1:2015, EN62841‑2‑5:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT .
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D
e
WALT , Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
30.11.2020
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
DCS573
XJ, GB, QW
DCS573
XE
Voltage V
DC
18 18
Type 1 1
Battery type Li‑Ion Li‑Ion
No‑load speed min ‑1 5500 5500
Blade diameter mm 190 184
Maximum depth of cut mm 67 64
Blade bore mm 30 20
Bevel angle adjustment 57° 57°
Weight (without battery pack) kg 3.7 3.7
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑5:
L
PA
(emission sound pressure level) dB(A) 89 89
L
WA
(sound power level) dB(A) 100 100
K (uncertainty for the given
sound level)
dB(A) 3 3
Vibration emission value a
h,W
=
m/s
2
2.8 2.8
Uncertainty K =
m/s 2 1.5 1.5
Congratulations!
You have chosen a D
e
WALT tool. Years of experience, thorough
product development and innovation make D
e
WALT one of the
most reliable partners for professional power tool users.
Technical Data
English (original instructions)
190 MM CORDLESS CIRCULAR SAW
DCS573