
6
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal injury, turn the radio off and
disconnect the battery pack before making any adjustments or removing/installing
attachments or accessories.
An accidental start-up can cause injury.
To Install the Coin Cell Battery (Fig. 3)
WARNING:
When replacing
battery, replace it with the same
brand and type. Observe correct
polarity (+ and –) when replacing
batteries. Do not store or carry
batteries so that metal objects can
contact exposed battery terminals.
Your radio is equipped with
memory capacity in order to
store the time and your selected
memory channels. When the radio
is OFF, this memory capacity is
powered by one coin cell battery
that is included with the radio.
1. Turn the charger/radio off
and unplug from the power
source.
2. Unscrew the screw (M) on the battery door (O).
3. Press down on the battery door latch and pull to open.
4. Install the coin cell battery (N) according to the diagram inside the coin cell
battery area.
5. Replace the battery door, insert screw and tighten.
NOTE:
To reset the LCD display, clock and presets, remove the coin cell battery and
re-install it. Follow this procedure if the screen seems to lock in place.
OPERATION
WARNING:
Always observe the safety instructions and applicable regulations.
WARNING:
Do not place the charger/radio in locations where it may be exposed to
dripping or splashing.
Installing and Removing the Battery Pack (Fig. 4)
NOTE:
To ensure maximum performance and life of Li-Ion batteries, charge the
battery for a minimum of 10 hours before first use.
I
K
FIG. 4
J
FIG. 5
Insert the battery pack (I) into the receptacle until it is fully seated.
To remove the battery pack from the radio, press the release button and firmly pull the
battery pack out of the receptacle.
FUEL GAUGE BATTERY PACKS (FIG. 5)
Some D
E
WALT battery packs include a fuel gauge which consists of three green LED
lights that indicate the level of charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge button (J). A combination
of the three green LED lights will illuminate designating the level of charge left. When
the level of charge in the battery is below the usable limit, the fuel gauge will not
illuminate and the battery will need to be recharged.
O
M
N
FIG. 3
Summary of Contents for DCR019-XE
Page 1: ...DCR019 XE AM FM COMPACT JOBSITE RADIO INSTRUCTION MANUAL ...
Page 2: ......
Page 11: ......