31
English
3. Activate the Bluetooth
®
search function of your audio device or
mobile phone. Once the adapter is found (will appear as:
D
e
WALT
Adapter DCR002) confirm pairing on your device. Once pairing is
successful the rapid red/blue flashing of the LED will cease and the
indicator will flash blue once every 5 seconds. If paired successfully,
your audio device should now be able to connect with the adapter.
Consult with your device’s owners manual for details on pairing and
connecting.
adapteR StatuS iNdiCatoR
LED indicator
Status
Flashes red and blue rapidly
Adapter is in pairing mode.
Flashes blue once every 2
seconds
Adapter is in standby mode and
not connected.
Flashes blue once every 5
seconds
Adapter is paired with a device.
Flashes red once every 20
seconds
Adapter’s battery is low and
needs to be charged.
Flashes red and blue alternately
Adapter is charging while
connected to an audio device
Solid red light
Adapter is charging
CoNNeCtiNG aNd MouNtiNG the adapteR to a WoRkSite Radio (FiG. 2, 3)
The Bluetooth
®
adapter is compatible with all
D
e
WALT
work site radios,
most non-
D
e
WALT
work site radios and other audio devices with a
standard 3.5mm audio in jack.
The Bluetooth
®
adapter can be mounted and stored on a work site radio
or other speaker by mounting the adapter storage clip (e) to the radio.
Being mindful of the adapter’s cord length in relation to your radio’s audio
jack, apply the adhesive strips (f) provided on the back of the storage clip
and to a flat surface on your radio, refer to figure 3. Slide the adapter into
the storage clip and connect the 3.5 mm audio plug (d). Remove adapter
from clip for charging if necessary.
