37
EngLIsh
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Date Code Position (Fig. A)
The date code
20
, which also includes
the year of manufacture,
is printed into the housing of the cut-off tool and shroud.
Example:
2020 XX XX
Year of Manufacture
Description (Fig. A)
WARNING:
Never modify the power tool or any part of it.
Damage or personal injury could result.
1
Trigger switch
2
Lock-off lever
3
Spindle lock button
4
Spindle
5
Side handle
6
Battery pack
7
Battery release button
8
Swiveling dust port
9
Collar screw
10
Metal base
11
Depth of cut adjustor
12
Depth of cut adjustment
knob
13
Removable wheels
14
Front shroud button
15
Side shroud button
16
Upper shroud
17
Lower shroud
18
Locking flange
19
Backing flange
Intended Use
Your cut-off tool with cutting shroud has been designed for
professional masonry cutting applications. It is not intended for
use with metal or wood. It may used only for dry cutting. Using
the appropriate diamond wheel and dust extractor vacuum can
be used to remove the vast majority of static and airborne dust
which without the use of the cutting shroud could otherwise
contaminate the working environment or pose an increased
health risk to the operator and those in close proximity.
DO nOT
use under wet conditions or in the presence of
flammable liquids or gases.
The cut-off tool with cutting shroud is a professional tool.
DO nOT
let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm.
This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Electronic Clutch
The electronic torque limiting clutch reduces the maximum
torque reaction transmitted to the operator in case of jamming
of a disc. This feature also prevents the gearing and electric
motor from stalling. The torque limiting clutch has been factory-
set and cannot be adjusted.
Brake
Once the power is shut off, the brake stops the wheel spinning
more quickly than a unit without this feature. This improves
efficiency and increases user protection. Stopping time will vary
depending upon the type of wheel used.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories.
An accidental
start-up can cause injury.
WARNING:
Use only
D
e
WALT
battery packs and chargers.
Inserting and Removing the Battery Pack
from the Tool (Fig. B)
nOTE:
Make sure your battery pack
6
is fully charged.
To Install the Battery Pack into the Tool Handle
1. Align the battery pack
6
with the rails inside the tool’s
handle (Fig. B).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the release button
7
and firmly pull the battery pack
out of the tool handle.
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. B)
Some
D
e
WALT
battery packs include a fuel gauge which
consists of three green LED lights that indicate the level of
charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge
button
21
. A combination of the three green LED lights will
illuminate designating the level of charge left. When the level
of charge in the battery is below the usable limit, the fuel gauge
will not illuminate and the battery will need to be recharged.
nOTE:
The fuel gauge is only an indication of the charge left on
the battery pack. It does not indicate tool functionality and is
subject to variation based on product components, temperature
and end-user application.
Attaching Side Handle (Fig. A)
WARNING:
Before using the tool, check that the handle is
tightened securely.
WARNING:
The side handle should always be used to
maintain control of the tool at all times.
Summary of Contents for DCG4610
