DeWalt DCF883 Instruction Manual Download Page 6

5

English

Contents of opened battery cells may cause respiratory
irritation. 

Provide fresh air. If symptoms persist, seek medical

attention.

WARNING: 

Burn hazard. Battery liquid may be flammable if

exposed to spark or flame. 

The RBRC™ Seal

The RBRC™ (Rechargeable Battery Recycling 
Corp oration) Seal on the nickel cadmium, nickel metal 
hydride or lithium ion batteries (or battery packs) indicate 
that the costs to recycle these batteries (or battery 
packs) at the end of their useful life have already been 
paid by D

E

WALT. In some areas, it is illegal to place spent nickel 

cadmium, nickel metal hydride or lithium ion batteries in the trash or 
municipal solid waste stream and the RBRC program provides an 
environmentally conscious alternative.
RBRC™, in cooperation with D

E

WALT and other battery users, has 

established programs in the United States and Canada to facilitate 
the collection of spent nickel cadmium, nickel metal hydride or lithium 
ion batteries. Help protect our environment and conserve natural 
resources by returning the spent nickel cadmium, nickel metal hydride 
or lithium ion batteries to an authorized D

E

WALT service center or 

to your local retailer for recycling. You may also contact your local 
recycling center for information on where to drop off the spent battery.
RBRC™ is a registered trademark of the

 Rechargeable Battery 

Recycling Corporation.

Important Safety Instructions for All 
Battery Chargers

SAVE THESE  INSTRUCTIONS: 

This manual contains important 

safety and operating instructions for battery chargers.

pack. Do not use a battery pack or charger that has received a sharp 
blow, been dropped, run over or damaged in any way (e.g., pierced 
with a nail, hit with a hammer, stepped on). Damaged battery packs 
should be returned to the service center for recycling.

WARNING: Fire hazard. Do not store or carry the battery 

pack so that metal objects can contact exposed battery 
terminals.

 For example, do not place the battery pack in aprons, 

pockets, tool boxes, product kit boxes, drawers, etc., with loose 
nails, screws, keys, etc. 

Transporting batteries can possibly 

cause fires if the battery terminals inadvertently come in 
contact with conductive materials such as keys, coins, hand 
tools and the like. 

The US Department of Transportation Hazardous 

Material Regulations (HMR) actually prohibit transporting batteries in 
commerce or on airplanes (e.g., packed in suitcases and carry-on 
luggage) UNLESS they are properly protected from short circuits. 
So when transporting individual battery packs, make sure that the 
battery terminals are protected and well insulated from materials that 
could contact them and cause a short circuit.

SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM ION (Li-Ion)

Do not incinerate the battery pack even if it is severely
damaged or is completely worn out.

 The battery pack can

explode in a fire. Toxic fumes and materials are created when
lithium ion battery packs are burned.

If battery contents come into contact with the skin,
immediately wash area with mild soap and water.

 If battery

liquid gets into the eye, rinse water over the open eye for 15
minutes or until irritation ceases. If medical attention is needed,
the battery electrolyte is composed of a mixture of liquid organic
carbonates and lithium salts.

Summary of Contents for DCF883















Reviews: