14
E N G L I S H
Congratulations!
You have chosen a D
E
WALT tool.
Years of experience, thorough product
development and innovation make
D
E
WALT one of the most reliable partners
for professional power tool users.
Technical data
DC509
DC519
Voltage V
DC
36 28
Weight (without battery
pack) kg
0.52
0.52
De
fi
nitions: Safety Guidelines
The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER:
Indicates an imminently
hazardous situation which, if not avoided,
will
result in
death or serious injury
.
WARNING:
Indicates a potentially
hazardous situation which, if not avoided,
could
result in
death or serious injury
.
CAUTION:
Indicates a potentially
hazardous situation which, if not avoided,
may
result in
minor or moderate
injury
.
NOTICE:
Indicates a practice
not
related to personal injury
which, if
not avoided,
may
result in
property
damage
.
Denotes risk of electric shock.
Safety instructions
When using power tools, always
observe the safety regulations
applicable in your country to reduce
the risk of
fi
re, electric shock and
personal injury.
Read all of this manual carefully before
operating the tool.
Save this manual for future reference.
General
1 Keep work area clean
Cluttered areas and benches can
cause accidents.
2 Consider work area environment
Keep the work area well lit (250 - 300
Lux). Do not use the tool where there
is a risk of causing
fi
re or explosion,
e.g. in the presence of
fl
ammable
liquids and gases.
3 Keep children away
Do not allow children, visitors or
animals to come near the work area or
to touch the tool or the mains cable.
4 Dress properly
Do not wear loose clothing or jewellery,
as these can be caught in moving
parts or caught by the air
fl
ow. Wear
protective hair covering to keep long
hair out of the way. When working
outdoors, preferably wear suitable
gloves and non-slip footwear.
5 Personal protection
Always use safety glasses. Use a face
or dust mask whenever the operations
may produce dust or
fl
ying particles. If
these particles might be considerably
hot, also wear a heat-resistant apron.
Wear ear protection at all times. Wear
a safety helmet at all times.
6 Guard against electric shock
Prevent body contact with earthed
surfaces (e.g. pipes, radiators, cookers
and refrigerators). When using the tool
under extreme conditions (e.g. high
humidity, when metal swarf is being
produced, etc.), electric safety can
be improved by inserting an isolating
transformer or a (FI) earth-leakage
circuit-breaker.
7 Do not overreach
Keep proper footing and balance at all
times.
FLASHLIGHT DC509/DC519
Summary of Contents for DC509
Page 1: ...DC509 DC519 www eu ...
Page 3: ...1 A 1 2 3 4 5 6 7 ...
Page 4: ...2 B D 7 8 9 6 2 4 3 C ...
