background image

5

NOTE:

 Battery storage and carrying caps are provided for use      

whenever the battery  is out of the tool or charger. Remove cap 

before placing battery in charger or tool.

WARNING: Fire hazard. Do not store or carry battery so 

that metal objects can contact exposed battery terminals.

 

For 

example, do not place  battery in aprons, pockets, tool boxes, 

product kit boxes, drawers, etc., with loose nails, screws, keys, 

etc. without battery cap. 

Transporting batteries can possibly 

cause fires if the battery terminals inadvertently come in 

contact with conductive materials such as keys, coins, 

hand tools and the like.

 

The US Department of Transportation 

Hazardous Material Regulations (HMR) actually prohibit transporting batteries in 

commerce or on airplanes (i.e., packed in suitcases and carry-on luggage) UNLESS 

they are properly protected from short circuits. So when transporting individual 

batteries, make sure that the battery terminals are protected and well insulated from 

materials that could contact them and cause a short circuit.

SPECIFIC SAFETY INSTRUCTIONS FOR NICKEL CADMIUM (NICD) OR NICKEL 

METAL HYDRIDE (NIMH)

 

•  Do not incinerate the battery pack even if it is severely damaged or is 

completely worn ou

t. The battery pack can explode in a fire.

  •  A small leakage of liquid from the battery pack cells may occur under 

extreme usage or temperature conditions.

 This does not indicate a failure. 

    However, if the outer seal is broken:

a.  and the battery liquid gets on your skin, immediately wash with soap and 

water for several minutes.

b.  and the battery liquid gets into your eyes, flush them with clean water for a 

minimum of 10 minutes and seek immediate medical attention. (

Medical 

note

:

 The liquid is 25-35% solution of potassium hydroxide.)

SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM ION (LI-ION)

 

•  Do not incinerate the battery pack even if it is severely damaged or is 

completely worn out. 

The battery pack can explode in a fire. Toxic fumes and 

materials are created when lithium ion battery packs are burned.

 

•  If battery contents come into contact with the skin, immediately wash area 

with mild soap and water.

 

If battery liquid gets into the eye, rinse water over the 

open eye for 15 minutes or until irritation ceases. If medical attention is needed, 

the battery electrolyte is composed of a mixture of liquid organic carbonates and 

lithium salts.

 • 

Contents of opened battery cells may cause respiratory irritation.

 

Provide fresh 

air. If symptoms persists, seek medical attention.

WARNING:

 Burn hazard. Battery liquid may be flammable if exposed to spark or 

flame. 

The RBRC™ Seal

The RBRC™ (Rechargeable Battery Recycling Corp oration) Seal on the

 

nickel cadmium, nickel metal hydride or lithium ion batteries (or 

battery packs) indicate that the costs to recycle these batteries (or 

battery packs) at the end of their useful life have already been paid 

by D

E

WALT. In some areas, it is illegal to place spent nickel 

cadmium, nickel metal hydride or lithium ion batteries in the trash or municipal solid 

waste stream and the RBRC program provides an environmentally conscious 

alternative.
RBRC™ in cooperation with D

E

WALT and other battery users, has established 

programs in the United States and Canada to facilitate the collection of spent nickel 

cadmium, nickel metal hydride or lithium ion batteries. Help protect our environment 

and conserve natural resources by returning the spent nickel cadmium and nickel 

cadmium, nickel metal hydride or lithium ion batteries to an authorized D

E

WALT 

service center or to your local retailer for recycling. You may also contact your local 

recycling center for information on where to drop off the spent battery.
RBRC™ is a registered trademark of the 

Rechargeable Battery Recycling Corporation.

Important Safety Instructions for all Battery Chargers

SAVE THESE INSTRUCTIONS: 

This manual contains important safety and operating 

instruc tions for battery chargers.
  •  Before using charger, read all instructions and cautionary markings on charger, 

battery pack, and product using battery pack.

DANGER: 

Electrocution hazard. 240 volts are present at charging terminals. Do not 

probe with conductive objects. Electric shock or electrocution may result.

WARNING: 

Shock hazard. Do not allow any liquid to get inside charger. Electric shock 

may result.

Summary of Contents for DC212-XE

















Reviews: