14
E N G L I S H
RADIO DC010
Congratulations!
You have chosen a D
E
WALT tool. Years of
experience, thorough product development and
innovation make D
E
WALT one of the most reliable
partners for professional power tool users.
Technical data
DC010
Power source
AC/DC
Mains voltage
V
AC
230
(U.K. & Ireland only)
V
230/115
Battery voltage
V
DC
7.2 - 18
Weight
kg
5.5
Fuses:
Europe
230 V tools
10 Amperes, mains
U.K. & Ireland
230 V tools
13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of
non-observance of the instructions in this
manual.
Denotes risk of electric shock.
EC-Declaration of conformity
DC010
D
E
WALT declares that these power tools have been
designed in compliance with: 89/336/EEC,
73/23/EEC, EN 60065, EN 50081, EN 50082,
EN 55013, EN 55020, EN 61000-3-2 &
EN 61000-3-3.
For more information, please contact D
E
WALT at the
address below, or refer to the back of the manual.
Director Engineering and Product Development
Horst Großmann
D
E
WALT, Richard-Klinger-Straße 11
D-65510, Idstein, Germany
Safety instructions
When using power tools, always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and
personal injury. Read all of this manual carefully
before operating the tool.
Save this manual for future reference.
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Consider work area environment
Keep the work area well lit (250 - 300 Lux).
Do not use the tool where there is a risk of
causing fire or explosion, e.g. in the presence of
flammable liquids and gases.
3 Guard against electric shock
Prevent body contact with earthed surfaces
(e.g. pipes, radiators, cookers and refrigerators).
When using the tool under extreme conditions
(e.g. high humidity, when metal swarf is being
produced, etc.), electric safety can be improved
by inserting an isolating transformer or a (FI)
earth-leakage circuit-breaker.
4 Keep children away
Do not allow children, visitors or animals to come
near the work area or to touch the tool or the
mains cable.
5 Use appropriate tool
The intended use is described in this instruction
manual. Do not force small tools or attachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for which it
was intended. Do not force the tool.
