10
English
100mm Cutting Wheels
Type 1 guard
backing flange
abrasive cutting wheel
clamp nut
Type 1 guard
backing flange
diamond cutting wheel
clamp nut
100mm Sanding Flap Discs
backing flange
non-hubbed sanding
flap disc
clamp nut
Type 27 guard
Mounting and Using Depressed Center
Grinding Wheels and Sanding
Flap Discs
MOUNTING AND REMOVING HUBBED WHEELS
CAUTION: Turn off and unplug the tool before making any
adjustments or removing or installing attachments or acces-
sories. Before reconnecting the tool, turn the switch on and
off to ensure that the tool is off.
Hubbed wheels install directly on the M10 threaded spindle.
Thread of accessory must match thread of spindle.
Please use the correct size of accessories according the rated size
in nameplate.
Do not use accessories designed for 125mm grinder on a 100mm
grinder!
1.
2. Thread the wheel on the spindle by hand.
3. Depress the spindle lock button and use a wrench to tighten the
hub of the wheel.
4. Reverse the above procedure to remove the wheel.
CAUTION: Failure to properly seat the wheel before turning the
tool on may result in damage to the tool or the wheel.
MOUNTING NON-HUBBED WHEELS
CAUTION: Turn off and unplug the tool before making any
adjustments or removing or installing attachments or acces-
sories. Before reconnecting the tool, turn the switch on and off
to ensure that the tool is off.
Remove backing flange by pulling flange away form
the machine.
