Devon&Devon Nobel Console, Assembly Instructions Manual

Page: 17 / 97

A
B
D
F
C
E
E
N
G
16 -
ENG
WARNINGS
Make sure that the parts are intact. In case of defect or doubt, contact the retailer.
Assembly must be carried out following the instructions indicated below.
Our company declines any liability for installations failing to comply with current
regulations and for assembly and maintenance without following these warnings and
instructions for use.
- Check the pre-arrangements of the systems.
- Make sure that alle the items are present inside the packing referring to the Packing
List shown on the following pages. Also check that all components have no visible
defects.
- If any defects is found, contact Devon & Devon immediately.
- The presence of at least two operators is required for the assembly of this product.
- The assembly instructions are provided assuming that the walls are on level and
have a suitable structure to support the product.
Devon&Devon reserves the right to alter the product due to technical production
reasons and it must not in any case be considered liable for any inconveniences
caused by such changes.
The parts of the packaging (boxes, plastic bags, polystyrene, etc.)
must not be left within the reach of children as they may be a source
of danger (choking hazard, skin abrasion, etc.…).
BEFORE STARTING
NECESSARY TOOLS
(NOT SUPPLIED BY DEVON&DEVON)
A. Level
B. Drill/Screwdriver
C. Wrench/Allen wrench/Pliers
D. Silicone
E. Pencil
F. Meter