28 | 29
Length of button press
Function
LED behaviour
3-9 seconds
The WiFi Repeater ac is connected to the router.
The bottom LED on the WiFi display flashes quickly for a max. of 2 minutes.
1-3 seconds
A mobile device is connected to the repeater.
The bottom LED on the WiFi display flashes quickly for a max. of 2 minutes.
>10 seconds
All settings are reset to the factory default settings.
The top four LEDs on the WiFi display flash briefly. The LED lights subsequently switch off and the device
restarts.
LED behaviour
Status: The devolo WiFi Repeater ac ...
The bottom LED on the WiFi display is illuminated.
... is in the start-up process for a max. of 40 seconds.
The bottom LED on the WiFi display flashes slowly.
1. ... is in an unconfigured state.
2. ... is configured via the web browser.
3. ... is no longer connected to the router after the configuration.
The bottom LED on the WiFi display flashes quickly.
... is being configured via the WPS button.
The LEDs on the WiFi display are illuminated continuously.
1. ... is configured successfully.
2. ... has been set up successfully and is active. Depending on the signal strength, up to 5 LED indicators of
the WiFi wave symbol light up. Three illuminated LED indicators are indicative of an optimal location
for the devolo WiFi Repeater ac.
3. ... is in access point mode: All 5 LEDs light up.
WPS button
Behaviour of the device LEDs
| GB |
Summary of Contents for Kurulum
