background image

                                                                                                                                                                                                             Introduction 16 

                                                                                                                                                                                                                                               devolo Magic 2 LAN triple

3

Red LED

Solid on

Status 1

The other network nodes are in standby mo-
de, so they cannot currently be accessed
over the electrical wiring. The PLC LEDs on
the other devolo Magic adapters flash white
only for a short time. 

Status 2

The connection to the other network nodes
has been interrupted. There may be electro-
magnetic or radio frequency interference on
the power line. In this case, put the
devolo Magic adapters closer to each other
or try to shut off the source of interference. 

Can be disabled

4

Red  and
white
LED

Flashing at in-
tervals of 

0.1

sec

red

/

2 sec

.

white

Data transmission rate not in optimum
range **

Can be disabled

LED

Behavior

Meaning

LED status display
(web interface*)

Summary of Contents for 08789








































Reviews: