DEVOLA YL-208E, Instruction Manual, Page: 4 / 10

60%
Operating Your Dehumidifier
POWER:
Press to switch the appliance ON (3 beeps will sound). Press again to switch the
appliance OFF.
SPEED:
‘M’ mode is set when the appliance is switched ON. Press the mode button to control
the fan speed through the sequence below. (L – Low, M – Medium, H – High). The
corresponding LED will illuminate on the control panel and side panel.
HUMIDITY:
Continuous operation is set when the appliance is first switched ON. To change the
required relative humidity press the HUMID button through the sequence below. The
corresponding LED will illuminate.
Note: Humidity selection applies to Low and Medium mode. High mode is fixed in
CONTINUOS operation.
In CONTINUOUS operation the desiccant wheel will operate to remove ALL moisture
present in the air & fabric of the building. At 40%, 50% & 60% the appliance will operate to
achieve the set humidity. Once achieved, the desiccant wheel will stop operating until the
relative humidity rises above the set humidity.
MEDIUM HIGH LOW
CONTINUOUS 40% 50% 60%