9
Setting the Timer in Auto Mode (Weekly Timer)
This setting is to control what time your heater comes on and off throughout the week. The
desired temperate cannot be set differently for each segment. You can set four heating segments
per day meaning that you can schedule up to four startup times and shutdown times per day.
Timers can only be set in one-hour increments so when you have selected the weekday and the
hours for the timer, if the display shows [09-14] for example, it means it will come on at 09:00
and go off at 14:00 and not that the timer is set to 09.14am.
•
Please make sure the Actual Date and Time of the heater has been set first using steps
from page 7.
1.
Press the Manual/ Auto mode selection button (M/A) (19) to select Auto mode. The
display shows "A" When the unit is in Auto mode (8).
2.
Press the "Set" button (13) the day of the week display (18) flashes.
3.
Use the up button (10) and down button (11) to select the day of the week that you would
like to set the timer for.
4.
Press the "Set" button (13) again once the desired day is flashing and you will see that the
hour indicator which is the left side of the time display is now flashing (17).
a.
This will now let you select the startup hour of the first timer of the day using the
up and down arrows.
b.
You will know that this is the first heating segment selection because a 1 will be
displayed on the temperature indicator display (15).
5.
Once selected, press the "Set" button (13) again to confirm the start-up hour and use the
up (10) and down (11) buttons to select the hour that the heater will turn off (16) in
heating segment one. If the time it is due to turn on matches the time it is due to turn off,
for example 10-10, the system cancels this heating phase.
6.
Press the "Set" button (13) to confirm the first heating period.
7.
Repeat the above procedure to set the timer for the remaining three segments. If you do
not wish to set any further heating segments press the “Set” button repeatedly until you
reach the end of heating segment four or just press ‘OK’ (12) after confirming the first
segment and the heater will store solely the first heating segment.
Delete Timers
•
Hold the "OK" button (12) for 5 seconds until a "di" tone is sounded, all prior daily and
weekly timers will now be erased.
