
Other Useful Information (Cont.)
Battery replacement
If the battery in the remote control is flat, replace it with a new 3V CR2032
size button cell following the instructions (Fig. 7):
•
Push the locking tab to one side and pull out the battery holder at the back side of remote
control.
•
Remove the old button cell from the holder and insert a new one of the same type,
observing the polarity as illustrated above.
•
Insert the battery holder back into the remote control.
•
Do not open the batteries or short-circuit them.
•
Do not mix different types of batteries. Due to increased risk of leakage, empty batteries
should be removed. The batteries should also be removed from the remote control if it is
not being used for long periods.
•
Only dispose of batteries when they are fully discharged.
•
WARNING: Danger of explosion! To prevent a risk of explosion, batteries must not be
charged, heated, or disposed of by burning. Never throw batteries into a fire or subject
batteries to high temperatures.
•
Used batteries should not be disposed of in household waste. Dispose of them in
accordance with statutory regulations.
WARNING!
Keep batteries out of reach of children. Swallowing may
lead to serious injury or death in as little as 2 hours due
to internal burns. If swallowed, go straight to a hospital
emergency room. Dispose of used batteries immediately.
DANGER if swallowed
Summary of Contents for DVSH20B
Page 17: ......