OVERVIEW:
1.
Gear Indication
2.
Pull Cord
OPERATION
0 stall: Shutdown
＊
stall: Turbo
1 stall: 1000W
2 stall: 2000W
MOUNTING AND ELECTRICAL CONNECTION
1.
Drill three holes that have diameters of 8mm and are 40mm deep into the wall/firm surface,
in accordance with figures A and B.
2.
Push three plastic expansion tubes into the previously drilled holes and drill screws into
each expansion tube, as per figure C. Ensure 5mm of the screw is left visible as shown in
figure D.
3.
Hang the product on the screw (See figure E).
4.
Use the plastic plate to press on the product then drill the screw into it to av (see figure F)
1
2
